Rewettable Canvas Pipe Lagging is a 14.5 oz fiberglass asbestos pipe wrap that is easily installed over asbestos pipe insulation to conceal the fibers that are considered a health concern if airborne. The rewettable pipe lagging is made out of fiberglass cross woven thread that is embedded with an inorganic rewettable coating. Once moistened, the rewettable coating becomes sticky and hardens once it dries. This insulation lagging is tested to withstand a maximum operating temperature of up to 1000°F.
SPECIFICATIONS:
- Meets Military Specification: MIL-C-20079H Type 1 Class 4
- Meets US Coast Guard USCG 164.009 for incombustibility
- Rated for High Operating Temps: Up to 1000°F
- 100% Made in USA!
PRODUCT DIMENSIONS:
Per Yard: 60" wide x 3ft long* (for less than 5 yard orders)
Per Box (5 yards): 60" wide x 15ft long
Discounted Price per Box: $86.25
*Note: Per Yard orders are not cut individually, if you order 3 yards, you will receive a 9 ft long section
Installation Instructions:
- Repairs: Crumbling and deteriorating insulation should be repaired prior to encapsulation with Fiberlock Wet Wrap 'N' Seal Asbestos Repair Rolls.
- Measurement: Measure the outside circumference of the pipe insulation to be concealed to figure out how many yards of material to order. We recommend that the 60" length be used to cut 3ft long strips rather than have 60" long strips which are harder to install (we recommend an seam overlap of 3"-6" depending on pipe size.)
- Activation: The rewettable cloth coating is activated by water and hardens once dry to a cast like barrier.
- Dip Method: Dip the Rewettable Pipe Lagging in water (bathtub, pail, etc.) and allow excess water to drip off before application. (similar to wallpaper)
- Spray Method: Spray both sides of Rewettable Pipe Lagging with a spray bottle until completely wet.
- Application: Wrap the moist Rewettable Canvas Pipe Lagging around the pipe with the overlapping seam facing downwards on the upper part of the pipe. Allow a 3"-6" seam overlap along with a 3"-6" joint overlap between two sections. (gloves are recommended)
- Dry Period: Allow 12-24 hours for the asbestos pipe wrap to fully cure, we recommend waiting 48 hours before coating with Fiberlock Lag Kote Asbestos Encapsulation Paint
- Coating: As a secondary barrier, coating Rewettable Canvas with Fiberlock Lag-Kote II Asbestos Encapsulant will provide an aesthetically superior finish.
WARNING: Asbestos is a health hazard. Proper precautions should be taken at all times when working with or near asbestos containing materials including wearing a respirator and properly sealing off the work area from other parts of the building.
*Product Quantity Estimation: Please feel free to email us the dimensions of your pipe and we will calculate the total number of yards that are needed for your project. Rewettable Canvas Coverage Chart *Do not over order this product as asbestos removal/encapsulating products are NOT eligible for returns or exchanges.
Dimensions required for Coverage Calculation:
- Circumference around your pipe insulation
- Length of the pipe
