Hardware

Tools

C-Ring Staples (Hog Rings) Galvanized Steel (11/16")

Markwell C-Ring Staples are used with the Bostitch P7 Hog Ring Pliers. These Galvanized St

Tools

C-Ring Staples (Hog Rings) Stainless Steel (11/16")

Stanley C-Ring Staples are used with the Bostitch P7 Hog Ring Pliers. These stainless stee

Tools

End Cut Off Blue Duct Board Tool

The Blue End Cut-Off Tool is a hand held fabrication tool which finishes the edge of the fiberglass

Tools

Insulator Trowel - Small

Small trowel measuring 5 1/2 x 1 7/8 with a wooden handle.  Use this cement trowel for Cal-Coat

Tools

Insulator Trowel - Large

Masonry Trowel measuring 7 X 3 3/8 w/ Wooden Handle used for Cal-Coat smoothcote cement or firestopp

Tools

Channellock 7" End Nippers

Channellock End Nippers (End Cutters) are used by insulators when installing insulation with pins/ha

Tools

BOSTITCH 1/2" Staples

Bostitch STCR2619 1/2 Inch Staples (5,000 staples) are used with the Bostitch PowerCrown Tacker

Tools

V Groove 90 Degree Red Duct Board Tool

The V Groove tool is a handheld device that is used to carve out a "V" in fiberglass board.  It

Tools

Duct Board ShipLap Kerfing Tools

Duct Board Kerfing Tools are used to make cuts in fiberglass duct board to create HVAC ductwork.&nbs

Tools

Magnetic Collet

Magnetic Collets are used for CD Weld Machines. The collet is magnetic to hold pins in place for wel

Tools

#8 x 1/2" Drill Screw

#8 x 1/2" Galvanized Drill Screws with hex/slotted heads (aka aluminum zip screws, zippies, z-screws

Tools

Green Glue Pattern Notched Trowel

The Pattern Notched Trowel can be used to spread Green Glue Noiseproofing Compound onto rigid materi