MF- Resilient Isolation Clips (Case of 60)
Brand : MetroFlex
- Unit of Measure:
- Case of 60
- FREE SHIPPING!
Resilient Isolation Clips are designed to decouple drywall from a wall or ceiling structure which results in a reduction in sound transmission. MetroFlex clips are easy to install by simply being screwed to existing wood or steel studs/joists. Hat Channel is held in to place by clips spread no more than 48” apart. Drywall is then installed on top of the Hat Channel by simply being screwed into the channel strips. Drywall isolation clips can reduce noise transfer from between 75% to 100%.
SOLD IN CASES OF 60 RESILIENT ISOLATION CLIPS
FREE SHIPPING! *
*(48 States excludes Hawaii & Alaska)
*NOTE: Need less than 60 clips? Click Here to purchase single clips.
Buy 2 to 4 Cases = $275/case ($4.58/clip)
Buy 5 to 8 Cases = $265/case ($4.42/clip)
Buy 9+ Cases = $260/case ($4.33/clip)
The Stack Method is the easiest way to install MetroFlex clips. Clips are stacked no more then 48” apart horizontally on the studs and the same stud location is used for all pieces of Resilient Channel.Clips must be installed on both ends of the wall to ensure adequate support. The Stack Method is not recommended on ceiling applications where the weight of the ceiling should be spread among all joists.
The Staggered Method is the most effective way to install MetroFlex Clips, but uses more clips than the Stack Method. The same 48” Max Rule applies, but clips on the adjacent Resilient Channel are not placed on the same stud spot as above or below. Simply move the clip one stud to the left of the clip above. Clips must be installed on both ends of the wall to ensure adequate support.
Although these are slightly more expensive than the Resilmount A237R, these are much higher quality. The rubber piece on this clip is much softer and flexible than the stiff rubber of the A237R. I recommend.