Fiberlock Fiberset PM Asbestos Encapsulant (5 Gallon)
Brand : Fiberlock Technologies
- Unit of Measure:
- 5 Gallon Pail
Fiberlock Fiberset PM is a pre-mixed “lockdown” asbestos sealant for microscopic residual asbestos fibers present after the removal of Asbestos Containing Material (ACM). Fiberset PM is a ready-to-use, Class “A” fire-rated asbestos encapsulation coating that provides a flexible barrier over residual asbestos fibers to ensure final air clearance. Fiberset PM is UL® classified for use as a primer for fireproofing replacement materials under the “Encapsulant Materials” section of the UL directory, and is compatible with most leading brands of flooring adhesives. Fiberset PM is a water-based asbestos sealant that employs advanced 100% acrylic resin technology to extend the life expectancy of airless spray equipment.
UOM: 5 Gallon Pail
LOCKDOWN: Sealing microscopic residual fibers after asbestos removal is mandatory on every project. Prior to post-removal air monitoring, apply one coat to all exposed surfaces. Fiberset PM has been accepted as part of a UL Classified Fireproofing System for use with Retro-Guard materials.
PULL DOWN BY MISTING: Misting contaminated air is an effective technique prior to post-removal air monitoring. To pull down free-floating asbestos fibers, stand in the center of the room and hold the spray gun as close to the ceiling as possible. A mist should be sprayed parallel to the ceiling in every direction in a circle. Apply one coat to the poly sheeting on the walls and floor prior to dismantling containment area.
WARNING: Asbestos is a health hazard. Proper precautions should be taken at all times when working with or near asbestos containing materials including wearing a respirator and properly sealing off the work area from other parts of the building.