6-1/2" Perforated Insul Hangers w/Washers
Brand : Gemco / Midwest Fasteners
- Unit Of Measure:
- Per Box (100 Pins & 100 Washers)
100 pack of 6-1/2" Perforated Insulation Spikes with 100 Self Locking Washers. For jobs that require minimal hangers that are longer than the standard insulation spikes.
6-1/2" Perforated Insulation Pins are great for hanging thicker types of insulation products such as building insulation up around 6-7" thick (R-19/R-21 and below). These longer pins can also be used for insulation that is thinner than 6-1/2" and can easily be cut down to size after installation. The base of the perforated insulation pins can be adhered using Boss 180 Multi-Seal adhesive or they can be screwed or nailed in place.
*Recommended Pin Adhesive is Boss Multi-Seal 180
You may also be interested in shorter perforated pins: 2-1/2" Long Perforated Pins
Pin Length: 6-1/2 inches
Base: 2" x 2" with Perforations
Quantity: Box of 100
Washers: 100 included
Material: Mild Steel (Galvanized)
Gauge: 12 ga
- Fiberglass Building Insulation
- R-19 & R-21 (for 6-1/2" Pins)
- Marine/Boat Insulation
- Hull Insulation
- Engine Room/Compartment
These worked awesome for a repair job for metal roof ceiling. Glued them to the underside to hold the insulation up that had fallen due to animals..
I did not need 500 pins, so this was the perfect amount of pins . The price was reasonable,shipping costs were fair, and they were shipped quickly.The quality is fine. Overall everything was great !