Perforated Base Insul Hangers (Bulk Box)
Brand : Gemco / Midwest Fasteners
- Unit Of Measure:
- Per Box
Perforated Base Insul Hangers are used to fasten insulation material to walls and ceilings. Perforated Base Insul Hangers have a 2" square steel base which is perforated with nail sized holes. The holes/perforations allow a screw or nail to be easily installed to mechanically fasten the Perf Pin to a wall/ceiling. These perforations are specifically designed for use with Pin Adhesive. The Pin Adhesive is applied to the back of the pin base in nickel sized glob. When the pin is pressed against a wall/ceiling the adhesive will come through the penetrations creating a solid bond. Once the pin is fastened or the adhesive cured, the insulation can be pierced onto the pin which is attached to the perforated base. A Self Locking Washer is then placed onto the pin to securely hold the insulation in place. The excess pin length can then be trimmed with Channellock end cutters.
Pin Length: 1-5/8" up to 12-1/2"
Base: 2" x 2" with Perforations
Quantity: Varies per Size
Washers: SOLD SEPARATELY
Material: Mild Steel (Galvanized)
Gauge: 12 ga
*Recommended Pin Adhesive is Boss Multi-Seal 180
NOTE: WASHERS SOLD SEPARATELY
We offer a variety of washer options for use with Perforated Base Insul Hangers.
- Standard Lock Washers
- 1-1/2" Round Lock Washers
- 1-1/2" Square Lock Washers
- Dome Caps (Silver, White, or Black)
- Fiberglass Building Insulation
- R-11, R-13 & R-15 - Order 4-1/2"
- R-19 & R-21 - Order 6-1/2"
- R-30 - Order 9-1/2"
- R-38 - Order 12-1/2"
- Approved for use on Metal Building walls/ceilings
- Fiberglass Duct Wrap
- EPS & XPS Foam Board
- Marine/Boat Insulation
- Hull Insulation
- Engine Room/Compartment