Foil-Faced Insulfrax LT Ceramic Blanket (1" Thick)

Brand :

(No reviews yet) Write a Review
Price: $280.00
Unit Of Measure:
Per Roll (2ft wide x 25ft long) 50sf/roll
Foil (1 Side)

Unifrax Insulfrax LT fiber chemistry has been combined with Unifrax’s proprietary fiber spinning technology to create a specialty high-temperature blanket with superior thermal and mechanical properties.  Insulfrax LT Blanket is a flexible, strong, lightweight, needled blanket produced from Insulfrax Fiber.  Mechanical needling of the spun Insulfrax fibers eliminates the need for binders in the product’s manufacture and results in a product with high tensile strength.  Since Insulfrax LT Blanket is completely inorganic, the product exhibits no smoke generation or outgassing in service.  Insulfrax LT Blanket combines low thermal conductivity with excellent resistance to thermal shock. Note that high humidity and wetting with water prior to service has little effect on Insulfrax LT Blanket.



Thickness: 1"
Density: 8 lbs/cf
Facing: Foil (1 side)
Roll Width: 24"
Roll Length: 25 ft
Square Feet: 50 sf

General Characteristics:

*  High Temperature Stability
*  Low Thermal Conductivity (20% Lower than Insulfrax S!)
*  High Tensile Strength
*  Resistance to Thermal Shock & Chemical Attack
*  Good Sound Absorption

Typical Applications:

• Furnace, kiln, reformer and boiler linings

• Investment casting mold wrappings

• Removable insulating blankets for stress relieving welds

• Reusable insulation for steam and gas turbines

• Flexible high-temperature pipe insulation

• Pressure and cryogenic vessel fire protection

• High-temperature kiln and furnace insulation

• Furnace door linings and seals

• Soaking pit seals

• Furnace repairs

• Thermal reactor insulation

• Expansion joint seals

• Primary reformer header insulation

• High-temperature gasketing

• Glass furnace crown insulation

• Incineration equipment and stack linings

• Annealing cover seals

• High-temperature filtration

• Nuclear insulation applications

• Atmosphere furnace lining

• Field steam generator lining

Recommended Operating Temperature: 2150°F
Melting Point: 3200°F

Each unit comes in a roll that is 24" wide and 25' long. (total 50 sf per box). This ceramic insulation is 1" thick. Aluminum Foil Facing on 1 side
*Warning: Wear a N95 Dustmask during handling (cutting) of Insulfrax LT to prevent inhalation of dust.

Unit Of Measure:
Per Roll (2ft wide x 25ft long) 50sf/roll
Foil (1 Side)