Aluminum 90 Degree Elbow Covers
Brand : Metal
- Unit Of Measure:
- Per Pair (Two Piece Fitting)
Aluminum 90 Degree Elbow Covers are made up of two precision cut matching halves that are used as weatherproofing and mechanical abuse protection on insulated piping. 90 Degree Aluminum Elbow Covers are made of alloy aluminum in .024" thickness for superior mechanical abuse protection. The inside of both halves are coated with a moisture retarder film to prevent electrolytic degradation while the outside is clear coated to prevent exterior corrosion. Easy installation includes screwing the two halves together over the insulated elbow (hot systems) or banding together (cold systems). Aluminum tinted silicone caulk should be used to seal all joints.
Aluminum 90 Degree Elbow Covers come in precise sizes to fit almost every type of pipe insulation. See the link below for sizing charts.
ALUMINUM ELBOW FITTING SIZE CHART
Aluminum 90 Degree Elbow Covers do not come with insulation, for applications under 1,000F we recommend use of Owens Corning UtiliCore Fiberglass Insert Blanket.
WARNING! - Aluminum 90 Degree Elbow Covers are sized DIFFERENTLY than 45 Degree Elbows, End Caps, Jacketing, and Tees. Please refer to the charts to make sure you are ordering the correct sizes.
*NOTE: Aluminum 90 Degree Elbow Covers are designed for Long Radius piping (welded). Please contact us if you need a substitute size for Short Radius elbows.
This order the 90's were back ordered from the factory. Other than the wait for the parts to arrive, excellent product and service.