2" 8# Mineral Wool Insulation Board
Brand : Rockwool / Thermafiber
- Unit Of Measure:
- Per Box (6 Panels / 48sf)
Rigid Mineral Wool Insulation provides superior thermal, acoustical and personnel protection performance for boilers, precipitators, ducts and mechanical equipment operating at temperatures from subambient to 1200°F.
The 8lb density 2" rigid mineral wool insulation board is non-combustible, water repellent, and designed for high temperature applications where durability and compressive resistance are required. Common application areas for this mineral fiber board insulation include storage tank insulations, drying/oven equipment, petro-chemical and power generating equipment protection where high temperature, fire resistance, and moisture resistance are concerns.
Thickness: 2 inches
Panel Size: 24" x 48"
Panels per Box: 6 Panels
VOLUME DISCOUNTS (PLAIN):
5+ Boxes = $78/box
10+ Boxes = $76/box
20+ Boxes = $74/box
VOLUME DISCOUNTS (FRK FACED):
5+ Boxes = $97/box
10+ Boxes = $95/box
20+ Boxes = $93/box
Manufacturers of this 2" mineral wool insulation product include Rockwool (formerly known as Roxul) and Owens Corning Thermafiber.
*Please Choose Facing Type:
PLAIN = No facing on either side of board
FRK FACING = Reinforced Silver Foil Facing on 1 side of board, the other side is left plain.
Superior thermal conductivity
Wide range of service temperatures Low in-service shrinkage; 0% @ 1050°F
Good compressive strength
Easy to fabricate
Boilers, furnaces and ovens
Heat exchangers, catalytic reducers and precipitators
Reactors, tanks and vessels
Process ducting and plenums
Silencers and acoustical baffles
**When using FRK faced mineral wool insulation, we recommend using FSK Tape for the seams.
**THIS ITEM CAN ONLY BE SHIPPED UPS GROUND (48 Contiguous States)
Purchased 2" mineral wool insulation with foil backing to install in two of my industrial ovens. I wanted to help the comfort of my employees and to try to get metal dried off after washing it. I can't believe how much this helped. It brought the room temperature down by 27 degrees, and raised the temperature in my ovens Immensely. I was told by one dealer they would not recommend using this. I contacted a local insulation company and showed them what I wanted to do, and they said it would definitely work. It did, and is Amazing.
This is a great quality product, it is easy to work with and does a great job. I insulted my boiler with it and it made a world of difference
This product resolved a high temp, potential fire issue when designing and building my curing oven for firearm finishes.