Cal-Sil 360° Insulated Pipe Support w/Metal Shield
- Unit Of Measure:
Cal-Sil 360° Insulated Pipe Supports with Metal Shields are used as insulated pipe supports which bear the weight of the pipe at each hanger point. These insulated pipe hangers are used at all pipe hanger points to prevent squishing or crushing of fiberglass pipe insulation. Cal-Sil 360° Pipe Hangers are made of 1200°F rated high-temperature Calcium Silicate Insulation which is jacketed with ASJ+ jacketing. The jacketed Calcium Silicate insulation insert is then wrapped with a 360° galvanized steel thermal pipe shield which snaps together with two halves.
Calcium Silicate = 6" long (9" long for pipe sizes 6"+)
Metal Shield = 4" long (6" long for pipe size 6"+)
Pipe Size 1/2" to 1-1/2" = 22 ga
Pipe Size 2" to 5" = 20 ga
Pipe Size 6" = 16 ga
- 100 PSI Calcium silicate meeting ASTM C-533 Type 1, C-585, C-795, E-84, Thermal Conductivity (‘k’) .40 @ 75° mean.
- Adhesive complying with NFPA 90-A, ASTM E-84
- G-90 Galvanized steel shield, small check per ASTM A-653 (replaces A-527).
- Factory applied ASJ+ jacketing meeting ASTM E 96A (maximum 0.02 perm), ASTM D-774, D-828 and E-84
- Jacket matches JM Ultra, Owens Corning ASJ Max, and Knauf ASJ+ jacketing
- All units and components are asbestos free and 100% made and assembled in the U.S.A.
CUSTOM MADE CAL-SIL COPPER PIPE SIZES!
- We stock factory custom made Copper Sizes in Cal-Sil Hangers!
- 5/8" up to 4-1/8" are stocked (contact us for pricing on larger copper sizes)
*All pipe sizes and thicknesses are available however we only have certain combinations in stock. All sizes listed on our site are in stock. Any that say unavailable are non-stock but they can be ordered. Please contact us on any sizes/thicknesses that you require!
*NOTE: The Cal-Sil 360° come with metal shields already, DO NOT order separate shields on our site.
*NOTE: Calcium Silicate is a fragile material. We pack these hangers up as best as we can however please allow for some slight damage during transit.