Duct Board ShipLap Kerfing Tools

Duct Board Kerfing Tools are used to make cuts in fiberglass duct board to create HVAC ductwork.  Each tool has its own specific use in regards to fabricating fiberglass duct board.

BLUE TOOL:
4 in 1 tool allows you to cut four different end cut offs with a simple change of blades.
*Blue Tools are Stock, click here to see our Blue Tool

RED TOOL:

V-Groove tool cuts out a V shaped groove in the fiberglass to allow a 90 Deg angle in the board.

*Red Tools are Stock, click here to see our Red Tool

BLACK/GREY TOOLS:
Female or Rabbet Shiplap Cut (Black = 1-1/4"  Grey = 7/8")

ORANGE TOOL:
Modified Corner ShipLaps (Left or Right) (1" and 1-1/2" a 2 way tool is available)

PURPLE/YELLOW TOOLS:
Reverse or Male Shiplap Cut (Purple = 7/8" Yellow = 1-1/4")

BROWN TOOL:
Male - Female Combination Cuts (For making transitions, putting shiplap in board sections less than 4 feet. Cuts finished duct sections)

*Please feel free to contact us if you have any questions/concerns about which tool you require.